Rear Combination Light
REPLACEMENT OF REAR COMBINATION LIGHT
REMOVE REAR COMBINATION LIGHT
(a) Disconnect negative (-) terminal from the battery.
CAUTION: Work must be started after approx. 90 seconds or longer from the time the ignition switch is turned to the %26quot;LOCK%26quot; position and negative (-) terminal cable is disconnected from the battery.
(b) Remove the side cover and trim rear cover.
(c) Remove two bolts.
(d) Disconnect connector and remove the grommet.
(e) Remove rear combination light.
(f) Remove bulbs and sockets.
(g) Remove the wire harness.
INSTALL REAR COMBINATION LIGHT For installation, follow the removal procedure in reverse.
Rear Combination Light
REPLACEMENT OF REAR COMBINATION LIGHT
REMOVE REAR COMBINATION LIGHT
(a) Disconnect negative (-) terminal from the battery.
CAUTION: Work must be started after approx. 20 seconds or longer from the time the ignition switch is turned to the %26quot;LOCK%26quot; position and negative (-) terminal cable is disconnected from the battery.
(b) Remove the side cover and trim rear cover.
(c) Remove two bolts.
(d) Disconnect connector and remove the grommet.
(e) Remove rear combination light.
(f) Remove bulbs and sockets.
(g) Remove the wire harness.
INSTALL REAR COMBINATION LIGHT For installation, follow the removal procedure in reverse.
Rear Light Assembly
REPLACEMENT OF REAR LIGHT ASSEMBLY
REMOVE REAR LIGHT ASSEMBLY
(a) Disconnect negative (-) terminal from the battery.
CAUTION: Work must be started after approx. 20 seconds or longer from the time the ignition switch is turned to the %26quot;LOCK%26quot; position and negative (-) terminal cable is disconnected from the battery.
(b) Remove the luggage compartment door trim.
(c) Disconnect connector.
(d) Remove five nuts and rear light assembly.
INSTALL REAR LIGHT ASSEMBLY Follow the removal procedure in reverse to carry out installation.
漏 2006 ALLDATA LLC. All rights reserved.
Terms of Use
