I do have tail lights but no brake or turn signal lights on the truck changed flasher fuse and checked all fuses they are good. tow package wires ar good and no corrosion or brakes or shorts have checked them out and have checked all light bulbs. Thanks
I have tail light but no brake or turn signal lights 1998 dodge cummings?
Take the connector out of your %26quot;T%26quot; Connector for your tail lights on both sides. Check to see that you have running lights (Voltage) and turn signals (Voltage that changes up/down) and use the truck as ground or a know good ground. Some people think that the white wire is ground and in fact it is for backup lights. If your voltages are present like they should be then connect the T connector to it and check the output to the trailer and see if they work and before you connect the tail lights back into the connector check the contacts for voltage like you did when you had the %26quot;T%26quot; connector out. IF you have the voltages then it should work unless you have open bulbs or your wires are cut someplace, or worse yet the wires are grounded some place that they shouldn't be... Basically disconnect everything check the main input to the connector, check the connector, and check the output of the connector. If you ar running LED's then switch wires on the hot and ground sides. LED's only work in one direction, where a bulb will work forward or reversed wired.
I have tail light but no brake or turn signal lights 1998 dodge cummings?
Change your blinker fluid.
Thursday, September 15, 2011
Motorcycle tail light problems?
I have a 1999 Suzuki GSX 750 F which is in pretty good condition... for some reason the tail light fuse keeps blowing (and also when this goes the instrument panel lights do too - I assume they're on the same circuit) When I change tail light fuse, the tail light and instrument panel backlight come back on... this doesn't affect the head light, which works fine, or the brake light which also is fine...any ideas why the tail light fuse keeps blowing... and how can I fix it?
Motorcycle tail light problems?
There must be a short perhaps caused by the wiring to anything on that circuit touching earth. Only a good inspection of the wiring for the tail lights and the instruments will find it and concentrating on the areas where th wiring bends like around the steering head might find it faster.
Motorcycle tail light problems?
There must be a short perhaps caused by the wiring to anything on that circuit touching earth. Only a good inspection of the wiring for the tail lights and the instruments will find it and concentrating on the areas where th wiring bends like around the steering head might find it faster.
I have a 1996 pontiac grand am -I have no turn signal, dashboard light, brake light, or tail lights?
I tried changing the fuse. The only fuse that was blown was the hazard light fuse..when I replaced, it caused the signal lights to work but it keeps popping (blowing out). I tried checking the engine fuse box to see if the lighting fuse needs to be changed but I couldn't get those fuses to come out. Does anyone know what I can do?
I have a 1996 pontiac grand am -I have no turn signal, dashboard light, brake light, or tail lights?
This is all related to a failure in the multifunction switch (also known as the turn signal switch).
When these fail,you will loose all the lights that you say.
I have a 1996 pontiac grand am -I have no turn signal, dashboard light, brake light, or tail lights?
unless you're great with electrical problems, i would suggest you taking it in to get diagnosed by a professional. plain and simple, you have a short in the system which is causing too much amperage to flow into that specific fuse which is causing it to blow. and whatever is shorting that out is probably taking power away from all your exterior lights. so unless you're up for a month's worth of headache, take it in :)
you have a short in that system causing that fuse to blow. you need to find the problem, fix it, then replace the fuse
make sure your using the right amperage fuse for ur lights
I have a 1996 pontiac grand am -I have no turn signal, dashboard light, brake light, or tail lights?
This is all related to a failure in the multifunction switch (also known as the turn signal switch).
When these fail,you will loose all the lights that you say.
I have a 1996 pontiac grand am -I have no turn signal, dashboard light, brake light, or tail lights?
unless you're great with electrical problems, i would suggest you taking it in to get diagnosed by a professional. plain and simple, you have a short in the system which is causing too much amperage to flow into that specific fuse which is causing it to blow. and whatever is shorting that out is probably taking power away from all your exterior lights. so unless you're up for a month's worth of headache, take it in :)
you have a short in that system causing that fuse to blow. you need to find the problem, fix it, then replace the fuse
make sure your using the right amperage fuse for ur lights
On a Mitshubishi Eclipse 2004 can just anyone change a rear tail light?
Some one randomly busted out my Right tail light. I have an estimate to order the parts. By the way its just not the light but the whole covering for the light. Luckily the light still works for now. Can anyone change the light/covering with little to no trouble--I guess provided you had the right tools. Thank you for your help
On a Mitshubishi Eclipse 2004 can just anyone change a rear tail light?
and a little know howprivate dermatologist desktop issue
On a Mitshubishi Eclipse 2004 can just anyone change a rear tail light?
and a little know how
How do you change a tail light bulb in a Pontiac Aztec?
The tail light bulb went out and needs to be replaced.
How do you change a tail light bulb in a Pontiac Aztec?
Lift the rear hatch you will see 2 torex (sp) screws. Take them out and the tail light should just slide out then remove the bulbs and replace them.
How do you change a tail light bulb in a Pontiac Aztec?
You actually bought a pontiac aztec?
go buy a new car
You don't . You get rid of it right now.
The owner's manual should tell you exactly how to do it
How do you change a tail light bulb in a Pontiac Aztec?
Lift the rear hatch you will see 2 torex (sp) screws. Take them out and the tail light should just slide out then remove the bulbs and replace them.
How do you change a tail light bulb in a Pontiac Aztec?
You actually bought a pontiac aztec?
go buy a new car
You don't . You get rid of it right now.
The owner's manual should tell you exactly how to do it
How do i change a tail light in a Hyundai Elantra??
please help... when we try to change the tail light... its very confusing please help...
How do i change a tail light in a Hyundai Elantra??
Probably going to go in through the trunk, and pull back the plastic matting against the back wall of the trunk.
Are you trying to remove the whole tail light or just replace the light bulb?
In that case just go in and pull back the matting on the back wall, follow the wires to the light. The wires should lead to a piece of plastic that attaches to the actual tail light. Just turn the plastic piece and the light bulb should just slide out. Pull the light out (they dont screw in) and replace it. Then put everything back together in reverse
How do i change a tail light in a Hyundai Elantra??
take it to auto zone 9 times out of 10 they will put it in for free and they have the tools if needed to get it out should get no more then like 5 bucks
How do i change a tail light in a Hyundai Elantra??
Probably going to go in through the trunk, and pull back the plastic matting against the back wall of the trunk.
Are you trying to remove the whole tail light or just replace the light bulb?
In that case just go in and pull back the matting on the back wall, follow the wires to the light. The wires should lead to a piece of plastic that attaches to the actual tail light. Just turn the plastic piece and the light bulb should just slide out. Pull the light out (they dont screw in) and replace it. Then put everything back together in reverse
How do i change a tail light in a Hyundai Elantra??
take it to auto zone 9 times out of 10 they will put it in for free and they have the tools if needed to get it out should get no more then like 5 bucks
I need to know how to change the rear bulbs(tail lights) in a 99 Chevy Tahoe.?
Open the rear door. On the inside of the door frame their are 2 torx (looks like a star) screws, a T-15 is the size I believe. One to the top of the light cover and one to the bottom.
I need to know how to change the rear bulbs(tail lights) in a 99 Chevy Tahoe.?
going from memory there should be hex head screws on the outside of the lamp. One on the top one on the bottom. Take those out and pull the lamp right out. At least that is how the pickups are in those years.
I need to know how to change the rear bulbs(tail lights) in a 99 Chevy Tahoe.?
going from memory there should be hex head screws on the outside of the lamp. One on the top one on the bottom. Take those out and pull the lamp right out. At least that is how the pickups are in those years.
Subscribe to:
Posts
(Atom)